KTC

KTC (Kyoto Tool Co., Ltd.) is a Japanese hand-tool maker. Its range covers sockets, ratchet handles, wrenches, torque wrenches and car service tools. This page groups the KTC tools we stock by type, so you can jump to the right model. Every item is genuine Japanese-market stock, shipped from Japan with tracking.

KTC guide: models and how to choose ↓

172 productos

KTC guide: models and how to choose

Specs below are taken from each product page. Open the product for the full specification.

KTC ratchet handles

Model Drive Type Gear
BR390L 3/8" (9.5 mm) Long handle 90-tooth
BR390FL 3/8" (9.5 mm) Flex head, long handle 90-tooth
BRSW3L 3/8" (9.5 mm) Swivel head, long handle Not confirmed
BR4E 1/2" (12.7 mm) Standard handle 36-tooth
BR4L 1/2" (12.7 mm) Long handle 36-tooth

Side-by-side specs with Ko-ken: 3/8" ratchets compared and 1/2" ratchets compared. Working in a cramped engine bay? See ratchet tools for tight spaces. A ratchet head repair kit for 3/4" ratchets is also available: BR6A-K.

KTC socket sets by drive size

Drive Standard sets Deep sets Other sets
1/4" (6.35 mm) TB210E (10 pcs, 5-14 mm), TB214 (17 pcs, 3.2-14 mm), TB210 (13 pcs), TB2X20 / TB2X20B (25 pcs) TB2L10E (10 pcs) TBT226TH (26-pc Torx, hex, Phillips and slotted bit sockets)
3/8" (9.5 mm) TB310 (10 pcs) TB3L10 (10 pcs), TB3L05 (5 pcs) Twist sockets TB3TW06 / TB3TW10; E-Torx TB3E09; hex bit sockets TBT306H, TBT309BH, TBT310H
1/2" (12.7 mm) TB405 (5 pcs), TB410XE (10 pcs) TB4L05 (5 pcs) Twist sockets TB4TW05; hex bit sockets TBT407H, TBT409BH, TBT410H; stud bolt remover set BSR354

For a cross-brand overview, read 6 Japanese socket sets worth knowing.

Impact sockets for wheel nuts and trucks

3/4" (19.0 mm) and 1" (25.4 mm) drive impact sockets: deep thin-wall sockets (BP6L and BP8L series, e.g. BP6L-21TP, BP8L-24TP), standard 1" sockets (BP8 series, e.g. BP8-21P), and two-size wheel nut combination sockets (ABP6 and ABP8 series, e.g. ABP6-4119TP, ABP8-4121TP). For 1/2" impact wrenches: TBP4903 wheel nut socket set and the JAP451 and JAP418 air impact wrenches.

KTC torque wrenches

Series Models (drive, range as listed)
GW preset GW010-02 (1/4", 2-10 N·m), GW025-02 (1/4", 5-25 N·m), GW010-03, GW025-03, GW050-03, GW100-03 (3/8"), GW100-04, GW140-04, GW200-04 (1/2")
GW pre-locking GW050-03T (3/8")
CMPC preset CMPC0152 (1/4", 3-15 N·m), CMPC1003 (3/8", 20-100 N·m), CMPC1004 (1/2", 20-100 N·m)
Wheel nut (set value) WCMPA085 (85 N·m), WCMPA103 (103 N·m), WCMPA108 (108 N·m), all 1/2"
Interchangeable head TGW100103 (9 x 12 mm head, 20-100 N·m)

Ranges for GW models without a figure above are listed on each product page. See also all Japanese torque wrenches.

KTC wrenches and spanners

KTC hex keys, extensions and handles

KTC hammers, pliers and toolboxes

How to choose

Pick the drive size first. 1/4" suits small fasteners, 3/8" is the everyday size for car work, and 1/2" is for larger bolts and more leverage. Sockets and ratchets of the same drive size work together, even across brands.

Metric or inch. Most KTC sets are metric. For SAE fasteners, look for the inch sets (TMS208B, TS206B, HL259BSP) or the NEPROS NTB306BA inch socket set. NEPROS is KTC's premium line; see our NEPROS NBR390A guide.

KTC or Ko-ken? Both are Japanese makers of sockets and ratchets. Read KTC vs Ko-ken or browse Ko-ken tools.

Browse by tool type (all brands)

Ratchet handles · Sockets and socket sets · Torque wrenches · Wrenches and spanners · Hex and Torx keys · Hammers · Tool boxes