Digital Multimeter for Electricians: Why the KYORITSU 1009 Is Worth a Look
If you're searching for a digital multimeter for electrical work, here is a Japanese option worth a look: the KYORITSU MODEL 1009, a 3999-count digital multimeter for panel work and field troubleshooting that covers the everyday measurements without extra complexity.
Auto-Range With a Manual Override
The 1009 defaults to auto-ranging, so you're not stepping through a dial mid-measurement — point the probes, read the number. But it also has a dedicated RANGE button to lock into manual mode when you need a stable reading on a fluctuating signal, which auto-range can sometimes hunt on. HOLD freezes whatever's on screen so you can pull the probes out of a tight panel before you lose the reading.
Covers the Calls You Actually Get
Beyond DC/AC voltage and current, it has diode test, continuity (with buzzer at approx. 100Ω or below), capacitance measurement, frequency measurement, duty cycle measurement, and a REL (relative/comparison) mode for checking deviation from a reference value. A dedicated 10A terminal handles higher current draws without needing a clamp meter.
A Meter, Not a Pocket Toy
At 161 × 82 × 50mm and roughly 260–280g with batteries (sources differ), this isn't the smallest DMM on the market — it's sized like a toolbox meter, built to be gripped and read easily rather than squeezed into a shirt pocket. Some distributors list a holster as included; check the product page for the current contents.
Worth Ordering From Japan?
Fair question — a general-purpose multimeter isn't the kind of tool with an obvious "you can only get this from Japan" angle. What the 1009 offers is a CAT III 300V-rated meter from KYORITSU, a Japanese maker of electrical test equipment. If you're already building out a kit of KYORITSU gear (clamp meters, insulation testers, earth testers) and want your basic DMM to match, this is a reasonable one to add. If you just need any multimeter today, a local store will get one to you faster.
Full Specifications
| Model | KYORITSU MODEL 1009 |
| Display | 3999-count, auto/manual range |
| DC Voltage | 400.0mV / 4.000 / 40.00 / 400.0 / 600V (10MΩ input impedance) |
| AC Voltage | 400.0mV / 4.000 / 40.00 / 400.0 / 600V (10MΩ input impedance) |
| DC/AC Current | 400.0/4000μA / 40.00 / 400.0mA / 4.000 / 10.00A |
| Resistance | 400.0Ω / 4.000 / 40.00 / 400.0kΩ / 4.000 / 40.00MΩ |
| Continuity | 400.0Ω range, buzzer sounds at approx. 100Ω or below |
| Diode Test | Open-circuit voltage approx. 1.5V (0.4mA test current) |
| Capacitance | 40.00/400.0nF / 4.000 / 40.00 / 100.0μF |
| Frequency | 5.120/51.20/512.0Hz / 5.120/51.20/512.0kHz / 5.120/10.00MHz |
| Duty Cycle | 0.1–99.9% (pulse width / pulse period) |
| Standards | IEC 61010-1 CAT III 300V, IEC 61326-1 |
| Dimensions | 161(L) × 82(W) × 50(D)mm |
| Weight | Approx. 280g with batteries (KYORITSU data); distributors list approx. 260g |
| Battery / Auto power-off | AA (R6) ×2, approx. 30 min auto power-off |
| Included | Test leads (7066A), fuses (8919 ×1, 8923 ×1, both internal), AA batteries ×2, instruction manual |
| JAN | 4560187060052 |
Why Buy This From Us
We specialize in Japanese-market professional tools and measuring instruments. For US orders, shipping and import duties are included in the product price.
KYORITSU KEW 1009 Digital Multimeter, Auto Range, 600 V (Japanese Model)
Questions about compatibility or what's included? Message us before ordering and we'll help you confirm. Related: KYORITSU KEW 4105DLBT-H earth resistance tester.
View the KYORITSU KEW 1009 →Specifications sourced from KYORITSU's official product data. Specifications may change.
